MEPCO tariff rates show the latest electricity unit prices applicable in 2026, including all government taxes and additional charges. These tariffs determine how much consumers pay based on their electricity usage and connection category. MEPCO divides consumers into different categories, such as domestic, commercial, industrial, and agricultural.
Industrial and commercial users usually pay higher per-unit rates compared to domestic consumers. In addition, MEPCO applies protected and non-protected slabs, which directly affect the final bill amount. In this complete guide, we will explain all updated MEPCO tariff rates for 2026, including category-wise unit prices, slab details, and how they impact your monthly electricity bill.
Introduction to MEPCO Bill rates and Tariff
The tariff comprises various charges, including power supply and new connection fees. We can get a Mepco update schedule for new rates and any updates related to the electricity tariff.
Mepco tariff price per unit (KWh) charged to users based on electricity usage category. However, the electricity charges are regulated through the National Electric Power Regulatory Authority (NEPRA). Tariff rates sometimes suddenly increase and sometimes decrease depending on the prices of Fuel, oil, gas, and coal.
A-1. General Supply Mepco Tariff Residential
The A-1 tariff category applies to residential consumers of MEPCO. This category includes different unit slabs, minimum monthly charges, and Time-of-Use (TOU) rates for higher-load connections. Tariff rates are regulated by the National Electric Power Regulatory Authority (NEPRA).
- Single-phase connection: Rs. 75 per month
- Three-phase connection: Rs. 150 per month
| Tariff Category | Fixed Charges | Tariff variable charge | Applicable variable charge |
| A | E | D | |
| For a sanctioned load less than 5 kW | |||
| 1 – 100 Units | _ | 16.41 | 3.95 |
| For Consumption exceeding 50 Units | |||
| 1 – 100 Units | _ | 14.59 | 7.74 |
| 101 – 200 Units | _ | 16.41 | 10.06 |
| 201 – 300 Units | _ | 17.53 | 12.15 |
| 301 – 700 Units | _ | 19.07 | |
| Above 700 Units | _ | 19.07 | 19.55 |
| For Sanctioned load 5 kW & above | |||
| Time of use | _ | Peak – 20.27 Off Peak – 13.10 | Peak – 22.65 Off Peak – 16.33 |
A-2. General Supply Mepco Tariff Commercial
Tariff A-2 applies to residential consumers with higher electricity consumption or higher sanctioned load. Like other categories, a minimum monthly charge applies even if no electricity is used.
- Single-phase connection: Rs. 175 per month
- Three-phase connection: Rs. 350 per month
| Tariff Category | Fixed Charges | Uniform Tariff Variable Charges | Applicable Variable Charges |
| A | E | D | |
| For Sanctioned Load Less Than 5 kW | 19.56 | 19.95 | |
| Uniform tariff variable charge | 440.00 | 19.22 | 21.63 |
| Time of use | 440.00 | Peak – 21.02 Off Peak – 13.49 | Peak – 23.55 Off Peak – 17.58 |
A-3. General Services
Even with Tariff A-3, there will be a minimum monthly charge, as users do not use any electricity.
- Single Phase Connections: Rs. 175/- per consumer per month
- Three Phase Connections: Rs. 350/- per consumer per month
| Category | Fixed Charges | Uniform Tariff Variable Charge | Applicable Variable |
| A | E | D | |
| General Services | _ | 17.05 | 19.51 |
B. Industrial Supply Tariffs
- For B1 Consumers, there shall be a fixed minimum charge of Rs. 350/- per month.
- For B2 Consumers, there shall be a fixed minimum charge of Rs. 2000/- per month.
- For B3 Consumers, there shall be a fixed minimum charge of Rs. 50,000/- per month.
- For B4 Consumers, there shall be a fixed minimum charge of Rs. 500,000/- per month.
| Fixed Charges | Uniform Tariff Variable | Applicable Variable Charges |
| A | E | D |
| 18.31 | 17.23 | |
| 440.00 | 17.87 | 16.73 |
| _ | Peak – 21.19 Off Peak – 13.41 | Peak – 20.79 Off Peak – 15.23 |
| 440.00 | Peak – 20.95 Off Peak – 13.50 | Peak – 20.73 Off Peak – 15.02 |
| 420.00 | Peak – 21.11 Off Peak – 12.63 | Peak – 20.73 Off Peak – 14.93 |
| 400.00 | Peak – 20.93 Off Peak – 12.97 | Peak – 20.73 Off Peak – 14.83 |
C. Single Point Supply
| Tariff Category | Fixed Charges | Uniform Tariff Variable Charge | Applicable Variable Charges |
| A | E | D | |
| For supply at 400/230 Volts | |||
| Sanctioned load less than 5 kW | _ | 24.36 | 20.63 |
| Sanctioned load from 5 kW & 500 kW | 440.00 | 21.31 | 20.13 |
| Sanctioned load from 5 kW & 500 kW | 440.00 | 21.31 | 20.13 |
| For supply at 11,33 kv up to and including 5000 kW | 420.00 | 17.03 | 19.93 |
| For supply at 66 kv & above and sanctioned load above 5000 kW | 400.00 | 15.11 | 19.83 |
| For supply at 400/230 Volts 5 kW & upto 500 kW | 400.00 | Peak – 22.43 Off Peak – 15.00 | Peak – 23.55 Off Peak – 16.95 |
| For supply at 11,33 kV up to and including 5000 kW | 420.00 | Peak – 20.40 Off Peak – 12.89 | Peak – 23.55 Off Peak – 16.75 |
D. Agriculture Tariff
| TARIFF CATEGORY/PARTICULARS | FIXED CHARGES R/s/kW/M | Uniform Tariff Variable Charge Rs/kWh | Applicable Variable Charges Rs/kWh |
| A | E | D | |
| SCARP less than 5 kW | 22.92 | 17.63 | |
| Agricultural Tube Wells | 200.00 | 17.63 | 7.30 |
| SCARP 5 kW & above | 200.00 | Peak – 23.76 Off Peak – 14.25 | Peak – 20.55 Off Peak – 13.30 |
| Agricultural 5 kW & above | 200.00 | Peak – 21.44 Off Peak – 13.04 | Peak – 7.30 Off Peak – 7.30 |
To pay for the tariff, you must pay a minimum monthly charge of Rs. 2000/- per consumer if the consumer does not use any electricity.
Note: Consumers with sanctioned loads less than 5 kW can OPT for the TOU metering system.
E. Temporary Supply Tariffs
| Tariff Category | Fixed Charges | Uniform Tariff Variable Charge | Applicable Variable Charges |
| Residential Supply | _ | 21.73 | 22.79 |
| Commercial Supply | _ | 19.23 | 20.34 |
| Industrial Supply | _ | 18.38 | 18.31 |
For all types of E-1 (i &ii), users must pay a minimum of Rs 50 per day. However, it cannot be reduced to less than Rs 500 for the entire electricity supply period, even if you do not use any electricity.
F. Seasonal Industrial Supply
Mepco Tariffs
The price will be 125%, even an industrial tariff.
Note: Tariff users will have to change between tariff regulations and tariffs. This option is more useful for a new connection or the start of the season. The options available are strong, at least for one year. If you want to check Mepco peak hours, click here.
H. Public Lighting
| Tariff Category | Fixed Charges | Uniform Tariff Variable Charge | Applicable Variable Charges |
| A | E | D | |
| Street Lighting | 19.02 | 20.63 |
Tariff G will charge a minimum monthly charge of Rs. 500 per kilowatt (kW) of installed lamp capacity.
Residential Colonies Attached To Industrial Premises
| Tariff Category | Fixed Charges | Uniform Tariff Variable Charge | Applicable Variable Charges |
| A | E | D | |
| Residential Colonies attached to industrial premises | _ | 21.02 |
You can get your latest Mepco bill online.
Mepco Electricity Bill Calculation Formula
Mepco electricity bill calculation formulas are based on electricity consumption. However, the energies may be associated with these calculations; Mepco provides its consumers with a user-friendly approach for non-engineers.
Users can easily visit the Mepco official website and use the bill calculation formula by providing the required information in the provided fields; the system generates an accurate Mepco bill. It is an easy process and ensures accurate billing of millions of Mepco users.
Conclusion
The MEPCO tariff is useful for consumers to check and calculate their electricity bills, view updated tariff details, see monthly unit consumption, and see the latest per-unit prices. It helps users clearly understand MEPCO’s fixed charges and variable rates.
Electricity rates vary depending on usage type. If you use electricity for an industrial purpose, the per-unit price is generally higher compared to residential use. The total bill also depends on the number of units consumed and the load. For more detailed and official tariff information, you can visit the MEPCO page on the NEPRA website.
Frequently Asked Questions
How can we Calculate the Electricity Tariff?
To find your electricity cost, subtract the old reading from the new one to get the units used. Then multiply units by the rate per unit. For example, 1400 – 1200 = 200 units. If the rate is 6, the cost is 200 x 6 = 1200.
What is the Mepco Tariff?
Mepco Tariff is an essential factor that determines electricity costs for Mepco customers and their bill payments. It represents the price per unit of electricity. Mepco tariff refers to the updated electricity tariffs.
What Is The Benefits Mepco electricity Tariff?
Mepco tariff provides the electricity rates, charges, and updated tariff taxes by the Multan Electric Power Company to the surrounding areas in South Punjab, Pakistan.
What is the cost per unit Of Mepco electricity bill?
The cost per unit is 7.74 for the use of 1-100 units. But if you use mere units, then 100 units, the price per unit will increase.
How can I check Mepco latest Tariff updates?
You can check the latest Mepco tariff tax when any tariff tax is adjusted. Just visit the Mepco official website to check the latest tariff and tax rates.