To protect your home appliances from voltage fluctuations, overvoltage, first check the incoming voltage from your electricity transformer. The voltage mostly consists of 220 volts, but make sure a professional does this. If there’s a problem, file a complaint with WAPDA so they can inspect the transformer. Voltage problems mostly happen when the electrical phases are not working correctly.
If the transformer is fine but you’re still having voltage problems due to overload, especially in summer, you can take proactive steps to protect your electronic appliances. Use a digital voltage protector breaker on your main power supply, and also install a voltage maintenance stabilizer (also called an up/down controler transformer). This helps control high and low voltage and keeps your appliances safe.
Use A Modern Voltage Breaker And Protect Your Home Appliances
A Modern overvoltage control breaker helps keep your home appliances safe from voltage problems. You install it on your main electricity line, which comes from the transformer. It lets you set the highest and lowest voltage levels. If the voltage goes above or below your set range, it automatically stops the power to protect your devices and save your appliance from voltage fluctuation.
When the voltage becomes normal again, it turns the power back on. You can also choose how much current (AMP) it allows and how long it should wait before turning the power on or off. This gives extra safety to your electronics. These protected breakers are easy to buy from the market and usually cost between PKR 3000 to 3500.
Use A Voltage Maintenance Up/Down Stabilizer
Using a voltage stabilizer is a good method to protect your home appliances from voltage fluctuations. It controls high voltage and helps increase low voltage so your electronics get steady power. Install voltage stabilizer and maintenance electricity.
New stabilizers come with helpful features like automatic voltage adjustment, which keeps the voltage safe by raising or lowering it as needed, and an on/off delay setting, which waits a bit before turning things back on after a power cut to protect sensitive items.
Stabilizers are very helpful in rural areas where the voltage often goes up and down because WAPDA lines are longer. Even though a stabilizer can cost around PKR 25,000 to 35,000 for a small house, it protects expensive appliances, so it’s a smart choice for keeping your appliances and devices safe.
You can check your Mepco bill online without any charge.
Conclusion
Voltage fluctuations in homes can cause serious damage to electrical appliances and reduce their efficiency. To prevent this, using devices like voltage stabilizers or voltage protector breakers is very helpful. These tools protect home appliances by keeping the voltage stable. When power goes off, a stabilizer waits a few minutes before turning on again to let the voltage settle. It uses a transformer inside to adjust the voltage up or down, depending on the need.
For example, if your appliance needs 220 volts but the supply is only 200 volts, the stabilizer increases it to 220 volts. If the supply is 240 volts, it reduces it to 220 volts. However, if the voltage becomes too low, the stabilizer cuts off the output to prevent damage. By choosing and maintaining the right protection devices, homeowners can keep their appliances safe and working well for a long time.
Frequently Asked Questions
How To Protect Sensitive Electronics From Voltage Fluctuations?
To protect electronic appliances from voltage fluctuations, use a control breaker and an on-off switch. The use of a control breaker and an on-off switch can help you protect electricity appliances from voltage fluctuations.
How can I protect my Home appliances from voltage fluctuations?
You can use voltage stabilisers, control breakers and Uninterruptible Power Supplies (UPS) to protect home appliances from voltage fluctuations. using of these appliances and avoid voltage fluctuations.